Product InformationKUKDONG JEYEN CO., LTD.

Home > Product Information > Antifreeze

Antifreeze

High-quality and long-life antifreeze
High-quality and long-life antifreeze has a life cycle of 10 years or 200,000 km.
It does not contain nitrous acid, borate, silicate, and amine.
This high-performance product offers corrosion prevention even with low concentration.
It is highly safe, even with hard water.
It prevents the aging and oxidation of nonmetallic materials including plastic and rubber.
This product meets the criteria of long-life automobile antifreeze for Hyundai and KIA, Renault Samsung, Ssangyong, and GM.

High-quality and long-life antifreeze

Features of Antifreeze
Emits the heat generated from the combustion and friction of automobile engines Cooling
Prevents the freezing and busting of coolers in the winter Freezing prevention
Prevents the boiling of engine coolants in the summer Boiling prevention
Prevents the corrosion of metal-based cooling devices Metal corrosion prevention
Prevents the aging and oxidation of nonmetallic materials including plastic tank and rubber hose Nonmetallic material protection

  • Effects
  • Cavitation and erosion prevention- Crown antifreeze prevents cavitation erosion easily found on the aluminum engine head and block.
  • Excellent rust and corrosion prevention- General antifreeze offers corrosion prevention with 30% or higher concentration, but Crown antifreeze is a high-performance product that offers corrosion prevention with at least 20% concentration.
  • Excellent rust and corrosion prevention- It prevents the generation of corrosion products, fur, and reaction precipitates to keep the core of the radiator open while maximizing the cooling function by preventing the formation of bubbles.

  • Experimental Results

  • Cautions
  • 1 Wrong concentration- Low concentration (30% or less: freezing or corrosion); high concentration (70% or more: reduced freezing prevention and cooling)
  • 2 Wrong choice- Corrosion and precipitation due to a low-quality antifreeze
  • 3 No regular replacement- After a certain period, the metal corrosion prevention effect is diminished, resulting in corrosion and high precipitation.
  • 4 Wrong choice of water- Water that contains much hardness component may cause precipitation and diminished corrosion prevention.
  • 5 Foreign matters- If an oil or acid material is added, metal corrosion is not prevented and the seals are excessively swollen, resulting in leakage.
  • 6 Mixture of different antifreezes- It is recommended to refill or replace the antifreeze with the same product or type (genuine part) because mixing different antifreezes may cause reduced corrosion prevention, shorter life cycle, and corrosion of the components of coolers.